How Do I Know if My Tires Need to Be Balanced?

Tire dynamic balance is abstract for those who are new to driving. A dynamic balance is about balancing all wheels when in motion. So, how do I know if my tires need to be balanced?

Balance is when the weight of the wheel and tire is evenly distributed around the axle of the wheel. If the balance wheel is static, the wheel will not rotate on its own. Dynamic Balance is a method of adding weight on the rim (wheel) to disperse the weight during rotation or by adding the corresponding mass to the opposite side. For more information, learn more information on this matter through the article below.

Dynamic balancing of the wheels during driving a car is a change to the balance of the wheels. This process ensures that it transmits no vibrations to the steering wheel affecting the driver's vehicle control. After a period of operation, the wheels often appear unbalanced, especially with vehicles that move a lot in uneven terrain. When traveling at high speed, the wheels are shaken, making it difficult for the driver to control and feel unsafe.

To overcome this situation, it is necessary to balance the wheel dynamically. Balancing will be done by machine so being the weight of the inside and outside of the wheel. It is complicated. But, after the test results are available, the solution to balance the wheel is to use a lead clamp to balance the weight. It is straightforward, but few car owners care while the balance cost is extremely cheap. Wheel balancing needs to be done once a year and can be done at the repair center and tire shops.

How Do I Know if My Tires Need to Be Balanced?

Checking The Dynamic Balance of Tires

First, check and remove all stones, nails, foreign objects on the spikes. Then, install the rims and tires that have been fully inflated into the machine, lock the wheels. Next, check the wheel balance and wait for the wheel to stop turning.

The machine will notify you of the weight and position of the unbalanced point on the screen. In addition, the operator will then have to compensate for the weight at the position shown. Finally, remove the rim and tire from the machine.

When Should I Bring the Wheel to Dynamic Balance?

The answer is when the car is going straight on a flat road. In this situation, you still have the feeling that the steering wheel is shaking, or the body of the car is shaking uncontrollably. The tires have shown spots of wear on the tire surface.

When you let the car perform tire change, tire rotation, or tire patching, you must do an extra step of dynamic wheel balancing to help the wheels stay in the most balanced position possible. It helps the car operate lightly, ensuring safety during your journey. When your car is changed from a valve to a tire pressure sensor valve, it is also necessary to dynamically balance the four wheels.

Some Experiences on Tire Dynamic Balancing

First is the tire rotation. There is an article specializing in the effect and the form of tire rotation. You can open the manual to see more, depending on the vehicle and model. They all have common sense. Because when riding, the tire will wear unevenly on one tire and between the tires. It reverses the tires from front to back and vice versa to overcome this situation. The reversing or diagonal ones also have the same side.

If You Want to Balance Your Tires, You Must Have A Dynamic Balancing Machine.

During vehicle operation, because of heavy loads, sudden speed changes, or because of inertia or centrifugal force of wheel rotation, the wheels will lose dynamic balance and unbalance. We can understand static balance as when the wheel is not moving. But it should be further understood when the wheel operates at a certain speed. People will deal with dynamic imbalance because no one buys a car to leave it. Otherwise, they operate at a constant speed.

Dynamic imbalance often causes vehicle vibration, chassis noise, and shaft reversal. When balancing by machine, it will report the weight of the inside and outside of the wheel. When the tire is unbalanced, the solution is to use a clamp or glue to add to the two sides to balance each other. It is crucial to check tire pressure for wear and deformation and foreign objects on the tire. In one year, you should also re-balance the tire once. The cost is not expensive, depending on how much or little clamping.

How Do I Know if My Tires Need to Be Balanced

Why Does Tire Need to Be Dynamically Balanced?

Many tires have nails on them. But the tires are not flat, so they still go. According to the assessment, this habit is not good. You should pull out the nail and patch it again. If the nail goes on for a long time, it will damage the tire. Then, replacing a new tire will cost more than patching the tire.

The tire is the only part in contact with the road surface, resistant to wear, extreme temperatures, continuous loads. The inspection and maintenance regimes are more frequent and thoughtful with this part.

When you drop the steering wheel, you will see the car is reversed. You also need to check the wheel angle and dynamic balance. In addition, when you see that the rear of the car is shaking when braking, also check to see if the rear tire is flat or not.

Dynamic balancing happens quickly and takes no time at all. Therefore, when you go to tire maintenance or have something related to tires, ask the company or dynamic balance maintenance center. Help the car when changing direction is oriented safely by better gripping the road. The feeling of safety is when your driving skill is enhanced.

Leave a Comment